Mezzanine floor rack maintenance methods

As we all know, any kind of rack goes through a lot of processes during production to improve the stability and damage resistance of the rack, but it will inevitably be damaged during long-term use. In order to extend the service life of the racks, it is necessary to do a good job in the maintenance of the racks. Especially in the mezzanine floor rack, the area of ​​the racks is larger, and the workload of maintenance also increases.

sps20240221Mezzanine-floor-rack-maintenance-methods

During the use of mezzanine floor racks in warehouses, as time changes, it is inevitable that the surface paint will fall off, or there will be areas where water accumulates for a long time. As long as the raw material of the rack is stainless steel, the purpose of electrostatic spraying is to avoid oxidation caused by the contact between the rack and the air. Once the paint on the surface of the rack falls off or a certain area of the rack is stored for a long time, Water will accelerate the air oxidation rate of the rack. After oxidation, the load-carrying capacity and stability of the racks are greatly reduced, which will have a great impact on the operation of the warehouse.

The maintenance of the mezzanine floor rack can be divided into several parts. One is that employees must operate according to actual standards when handling daily tasks. For example, when storing goods, the weight of the goods must not exceed the load capacity of the mezzanine floor racks. If it is overweight, it will cause racks produce very large working pressure, which can easily cause damage to the racks. When operating a forklift to access goods, be careful not to collide with the racks. You should check the racks frequently so that you can detect any problems with the racks at the first time. Proper maintenance can also increase the service life of the racks.

  • Previous:
  • Next:

  • Post time: Feb-21-2024