Precautions for installation of heavy duty storage racks

Heavy duty storage racks are currently the most widely used type of storage racks among all types, with the best load-bearing capacity, usually reaching a height of about 30 meters, and advanced and efficient operation methods. However, installation is also an important part of customizing and producing heavy duty storage racks. What are the issues to pay attention to when installing heavy duty storage racks?

Precautions for installation of heavy duty storage racks

1. It is necessary to plan the placement direction and area division in advance, otherwise there may be problems with unreasonable rack placement and inability to fit the storage racks.

2. The installation of storage racks must start from the bottom and gradually move upwards. In case of high-altitude operations, safety equipment must be equipped and the storage racks must be installed layer by layer. It is not allowed to lift rack components from the air to the installation personnel. Summary of experience: Storage rack safety is the highest only when transporting materials from bottom to top. With the help of tower cranes, efficiency can be easily reduced and accidents can occur.

3. The installation of storage racks is carried out in the order of the first column, second crossbeam, and last layer board.

4. When installing screws, it is necessary to work from bottom to top, layer by layer without falling. In case of sudden perforation, the storage racks must be disassembled before drilling to avoid danger during high-altitude operations.

5. Due to the fact that the storage racks have just arrived, the spray molding may feel slippery to the touch. It is recommended that installation personnel wear gloves.

6. The installation of storage racks and personnel allocation must be done one by one. If someone is installing above, there must be someone below to assist.

7. When the storage racks are placed back to back, both sets of storage racks must be installed first from the bottom layer before proceeding with the installation of the second layer of storage racks.

In addition, the principle of storing goods on heavy duty storage racks is the same as other types of storage racks. Whether it’s pallet racks or longspan shelves, the goods should follow the principle of top-light and bottom-heavy, which is the best way to prevent the center of gravity of the storage racks from being unstable. Measure in advance and plan the most reasonable placement of storage racks to improve the work efficiency of the enterprise.